Bosch CLPK222-181 18-volt Lithium-Ion 2-Tool Combo Kit with 1/2-Inch Hammer Drill/Driver and 1/4-Inch Hex Impact Driver
The new Bosch CLPK222-181 18-Volt Combo Kit includes the HDH181X Brute Tough hammer drill with Active Response Technology and 25618 impact driver. Reduce the risk of injury from kickback or bind-up situations with Bosch Active Response Technology featured in the new the Bosch HDH181X 18-Volt Brute-Tough 1/2-Inch Lithium-Ion hammer drill/driver. The innovative on-board acceleration sensors automatically shut the tool down when a potentially dangerous torque reaction occurs. The Bosch engineered 4-pole motor provides 752 Inch/lbs of torque, making it powerful and efficient for drilling a broad range of high torque bits such as spades and augers. As with all Bosch best built cordless tools, advanced electronic motor and cell protection help prevent overheating and overloading for extended tool life and runtime. A built-in LED light illuminates the workspace for optimal visibility. All-metal Bosch gears and Durashield tool housing hold up in even the toughest jobsite conditions, including withstanding multiple 12-Foot drops onto solid concrete. The HDH181X is compatible with all Bosch 18-Volt Lithium-Ion batteries and chargers for maximum versatility. Bosch 18-Volt batteries feature cool pack technology, which integrates advanced heat conducive housing to keep the battery cooler and extend the life. The kit also includes the 25618 1/4-Inch impact driver. The Bosch 25618 impact driver offers the most compact design for increased maneuverability in tight spaces and extended comfort. The 1/4-Inch impact driver provides 1500 Inch/lbs of torque for heavy duty fastening and features a high performance motor that delivers 2800 RPM and 3200 BPM. The CLPK222-181 Combo Kit Includes: (1) HDH181X 1/2-Inch Hammer Drill/Driver, 25618 1/4-Inch Hex Impact Driver, (2) 18-Volt Lithium-Ion Batteries, (1) Charger, (1) Auxiliary Handle, (1) Belt Clip, (1)Magnetic Bit Holder, (2) Screwdriver Bits and (1) Carrying Bag.
- HDH181X 1/2-Inch hammer drill – Active response technology-superior control in bind-up situations
- HDH181X 1/2-Inch hammer drill – Built tough with Bosch exclusive Durashield housing and all metal gearbox to withstand rugged job site conditions
- HDH181X 1/2-Inch hammer drill – Maximum power 752 In. lbs of torque
- 25618 1/4-Inch hex impact driver – High performance motor and all metal gears deliver 2,800 RPM/3,200 BPM
- 25618 1/4-Inch hex impact driver – 1,500 Inch-Lbs. (125 ft.-lbs.) of torque
The Makita 18V LXT Lithium-Ion Brushless Cordless ½” Driver-Drill Kit (XFD061) is an ideal drilling and driving solution for the user who wants a drill with superior power-to-weight ratio. The XFD061 combines 530 in.lbs. of Max Torque with an efficient brushless motor that delivers up 50% more work per charge, increased power and speed, and longer tool life. For the pro user, this means more drilling and driving power, greater productivity, and fewer trips up and down the scaffolding or ladder to get to the battery charger. In driver mode, the adjustable torque settings provide more control for a full range of applications, from large fasteners to smaller, delicate screws. It weighs only 3.8 lbs. (with 3.0Ah battery) for increased comfort and superior power-to-weight ratio. The XFD061 is compatible with Makita 18V LXT Lithium-Ion batteries, from the fast-charging 18V LXT Compact 2.0Ah battery to full-size 18V LXT batteries for longer .
The Makita 18V LXT® Lithium-Ion Brushless cordless ½” driver-drill kit (XFD061) is an ideal drilling and driving solution for the user who wants a drill with superior power-to-weight ratio. The XFD061 combines 530 in.Lbs. Of max torque with an efficient Brushless motor that delivers up 50% more work per charge, increased power and speed, and longer tool life. For the Pro user, this means more drilling and driving power, greater productivity, and fewer trips up and down the Scaffolding or ladder to get to the battery charger. In driver mode, the adjustable torque settings provide more control for a full range of applications, from large fasteners to smaller, delicate screws. It weighs only 3.8 lbs. (With 3.0Ah battery) for increased comfort and superior power-to-weight ratio. The XFD061 is compatible with Makita 18V LXT Lithium-Ion batteries, from the fast-charging 18V LXT compact 2.0Ah battery to full-size 18V LXT® batteries for longer run time. It’S part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls™. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.
- Mechanical 2-speed transmission (0-400 & 0-1, 550 RPM) for a wide range of drilling and fastening applications
- BL Brushless motor delivers 530 in.Lbs. Of max torque
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
Battery lasts a decent amount of time, I am sure there are bigger batteries for it but would be heavier so this works just fine. drilled out about 2 holes in the 9 pieces I needed and still had life.I’ve been a Makita fan for a long time and have accumulated quite a few of their tools/batteries. I purchased my XPH102 model drill about a year and it’s seen some heavy use since then. I’ve used this drill to remodel, build a shed, lay fence, and I’ve even attempted to drill into concrete with this thing.One of the jobs I attempted with this drill was to install a large gun cabinet in my house; this required drilling four 1/2″ holes 5″ deep into the concrete foundation. After twenty minutes and three battery changes I had only completed 1 of the 4 holes (just FYI, I had a new Bosch masonry bit… so I can’t blame the drill bit).
One of the claims of this hammer/driver is “[it is] engineered for applications in wood, metal, masonry, and concrete” – my experience is that this is last part is NOT true. Most of us buying this drill are not going to use it to drill into concrete (because, let’s be honest, it’s not designed for that), so come on Makita, don’t BS us.
- Makita-built 4-pole motor delivers 480 in.Lbs. Of max torque
- Variable 2-speed design (0-600 & 0-1,900 RPM) (0-9,000 & 0-28,500 BPM) for a wide range of drilling, driving and hammer applications
- Features extreme protection technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions
- Compact and ergonomic design at only 7-3/4″ long
- Weighs only 3.9 lbs. With battery for reduced operator fatigue
Overall, this is a great drill for $99, only complaint would be it is a bit heavy but with how hard it works I can only assume that to be normal.
I have recently gotten into wood working and decided that I needed to have a thickness planer in my shop. With tight funds and realistic expectations, I decided to purchase the WEN 6550 planer. The WEN seems to get overwhelmingly good reviews.
The first piece of wood I ran through the planer was a scrap 2X4 that I know had a slight warp. Several passes through the planer gave me some nice square edges and most of the warp was planed out. I’m sure that if I had kept going I could remove the entire warp. Next I fed a piece of oak pallet wood through the planer that was warped and cracked. While the planer did nothing for the crack, it did remove every bit of nastiness and revealed a beautiful tiger pattern under all the rough wood. Now I just have to find the right project for this piece of wood.
One thing I read a lot about with all planers is snipe. The WEN 6550 is not immune to this either. While not bad there is definitely snipe there. Running other pieces of wood through the planer with sacrificial wood before and after what you are planing completely eliminated all traces of snipe. In fact, the cutter head did such a good job on my project I almost don’t even need to sand now.
But Fred, how loud is this planer? I’m glad you asked. It’s loud. Running it without hearing protection just means that you will become friends with an Audiologist sooner rather than later because you WILL need hearing aids. Ok, all kidding aside, yes, it is loud and yes, you should wear hearing protection. Without any wood running through the planer it’s not really any louder than any other tool in your shop. In fact, my table saw is probably louder but, put some wood through the planer and you can tell a huge difference in the decibels.
Wood removal is excellent but I have yet to turn the handle more than 1/2 a turn per pass (1/32nd inch wood removal) and mostly I’m only doing 1/4 turns (1/64th inch wood removal) with each pass. Each full turn will remove 1/16th inch of wood. So far, I’ve run pine, poplar, oak, walnut, maple, and purple heart through the planer and it has yet to even act like it’s having trouble. Once I’ve use the planer some more and gotten used to it, I’ll try doing a full 1/16th inch in a pass to see what happens.
This is a two blade cutter head planer and the blades are reversible. One review that I read said that blade removal was harder on this planer compared to others. Now, I will admit that I have nothing to compare that statement too but, I did not find blade removal hard or complicated. Just remove the two screws from the dust hood, remove the two screws from the blade cover and bam, there are your blades. There is a cutter head lock and you do have to push it down to rotate the cutter head to get to the 2nd blade but, that’s not hard or a big deal.
Time will tell how well this planer will hold up but, based on it’s performance so
Remember when you brought those old jagged boards back to life? The WEN 12.5 inch Benchtop Thickness Planer with Granite Table repurposes rough and worn wood to give it an exceptionally smooth finish. The powerful 15-amp motor combined with our two-blade cutting system provides over 18,000 cuts per minute at a 26 feet per minute feed rate. Plane boards up to 12.5 inches wide and 6 inches thick with ease. The smooth granite table never warps and provides precise support to wood passing through the machine. Combine that with the heavy duty cast iron base for a sturdy planer that does not walk or wobble during operation. And because it’s a WEN product, the WEN Thickness Planer comes backed by a nationwide network of skilled service technicians, a helpful customer support line and a two-year warranty. Remember when your planer could handle even the hardest of woods? Remember WEN.