Best Soldering Iron

Best Soldering iron is a widely used in labs, engineering schools, houses and by hobbyists. Soldering irons melt the solder so that it can flow between two joints. It instantly cools up and creates a conducting channel between the two workpieces.

Soldering irons come in different shapes and sizes with various adjustability options of temperature. The best soldering iron is sensitive to temperature changes and is safe to use. The following article lists the best soldering irons of excellent quality that can be utilised by you for your DIY projects.

How to solder:

1. Prepare solder and soldering iron. Specially, it’s necessary to keep the tip clean, which should be coated with solder.
2. Please wet the sponge before using.
3. Use the soldering iron to heat the weldment, such as PCB leads and pads, and keep the weldment heated evenly.
4. When the temperature is high enough, put the solder wire close to the joint, the solder will melt and flow freely.
5. Please remove the solder wire when the tin is enough.
6. Take away the soldering iron in a direction approximately 45°and power off.
7. Don’t pull the soldering iron tip outward and use it in that way, which will shorten the heating element life.

Cautions:

1. When the soldering iron is plugged in for the first time, there will come out a smoke from the tip end. The smoke will stop in a short while and a smoke would never come out again.
2. Use soldering stand and other aids to avoid burnt fingers.
3. Don’t pull the soldering iron tip outward and use it in that way, which will shorten the heating element life. 4. Don’t apply too much solder unnecessarily.

Notes:

1. Please be really careful when you are using the tools in avoidance of pricks or other injuries.

2. The iron heats up fast, so please select a suitable temperature. Working for long hours and high temperature may shorten its life.

Best Soldering Iron

Hakko FX888D-23BY Digital Soldering Station  

This soldering station seems very well built, and has quite a few nice features. As many others have mentioned, the two-button digital user interface is not great. This station has quite a few features, but you’ll need to read the manual and follow the instructions carefully to access them.There is one MAJOR problem with this unit. It is VERY easy to throw off its temperature calibration by hundreds of degrees accidentally. Changing the temperature calibration and changing the iron’s current temperature are almost exactly the same procedure, and it’s not immediately obvious that you’re doing one or the other. I did this almost immediately after taking it out of the box, and it was extremely frustrating.Otherwise, I never would have been able to set the correct temperature again, since I don’t have temperature measurement/calibration equipment.

Weller WLC100 40-Watt Soldering Station

Durable, Easy-to-Control Pencil Iron
At the heart of the WLC100 Soldering Station is a high-quality lightweight pencil iron with an ST3 iron-plated copper tip. To ensure that you can work comfortably for long stretches of time, the iron has a cushioned foam grip that sits comfortably in your hand as you work. It has a replaceable heating element, so you can continue using the same iron for a long time to come.
Easy-to-Adjust Variable Power Controls
Unlike many basic soldering kits, which can be difficult to adjust, the WLC100 features a variable power control that lets you adjust the power level from five to 40 watts with a simple turn of the knob on the base unit. This lets you choose the precise setting for each unique job that you tackle. The base also includes a “power-on” indicator light and on/off switch to help keep you from leaving a hot iron on accidentally.The workstation also provides a built-in iron stand to keep your workspace organized and a natural sponge tip cleaning pad to keep your tip ready to go at all times.
High-Quality Accessories for Dependable Performance
The WLC100 includes an ST3 iron-plated 1/8-inch screwdriver tip. Weller also offers a wide array of compatible ST series tips to perform a variety of applications (additional tips are sold separately).All Weller tips are constructed of solid copper and plated with iron, as well as nickel and chromium to protect against corrosion and solder creep, helping to ensure that your tools perform reliably over time. Additionally, Weller tips are pre-tinned with tin/lead solder.This WLC100 Soldering Station is UL-listed, which means it has been tested and meets independent safety standards. It is backed by a one year warranty against manufacturer’s defects in material and workmanship.I use this for occasional, basic DIY fixes, and this station is well-suited to that, especially at a $40 price point.
PROs:
+ Good for DIY, hobby, and occasional use
+ Good quality for the price
+ Weller is well-reputed and major brand, so a large variety of tips are available to suit almost any project
CONs:
– only 40 watts so it takes a while for the tip to re/heat than a higher wattage
– no temperature display, so you have to experiment to find the right dial setting for each soldering job
– not groundedWeighing how often I use this (occasional) against the cost increase to get the missing features (higher wattage, more precise temperature control, ESD safe), it’s not worth it to upgrade to the WES-51 (about $100, which is more than double the price).

Sywon Full Set 60W 110V Electric Soldering Iron Kit 

This Sywon Electric Full-set Soldering Iron kit can surely satisfy your de-soldering and soldering needs around the house. With its various extras, you can easily deal with PCB projects, solder loose wires and circuits of small gauge, LED lights of various kinds and intricate pieces of computers, replace TV capacitors or accessories, and work on small parts for RC cars, micro drones or any other trinkets.I have been involved with electronic design and such for some 40 years, and in that time I have used some great soldering irons. The Weller WES51 with digital temperature readout comes to mind. This is not one of those, but it’s not $150 either.

I was looking for an inexpensive soldering to use in the field, since my Weller is way too big to fit in a bag. I expected to be working on a range of devices, from 100 amp power connectors to trying to fudge an 0805 SMT resistor back into place. This calls for temperature control, which is what drew me to this kit.

It arrived and the contents looked pretty good. A small 60 watt iron, some solder, a solder sucker, and some various picks and other non-screwdriver tools. Why they always include these sets of picks with soldering irons is beyond me, as I have almost never had use for them while soldering. But the curved end tool is good for grabbing small springs, and as for the rest – well, the space in the bag is useful to hold a set of flat and JIS cross (not-Philips) drivers.

The PU leather carrying bag makes it handy for transporting all the units together, an amazing gift for your friends or family members who are hobbyists, DIY enthusiasts or soldering beginners.The upgraded heat-insulation material and steel-pipe design will protect the iron from being melted due to long time overheat. The solder tip with ventilation holes can help heat dissipation. The silicon handle cover brings great comfort.The inner-heated ceramic technology makes the soldering iron heat up very quickly, which both maintains the temperature stability and reduces energy consumption.Green-Red temperature scale indicates the temperature status of the soldering iron. It helps to remind you to choose the right temperature during use.

Package Specification:

1 x Soldering Iron: Tempature adjustable from 200℃ to 450℃ (392℉ to 842℉ ) 60W 110V.

5 x Extra Solering Tips: General 900M series

2 x Tweezers: ESD-10 , ESD-15

1 x Solder sucker: 7.36 inches (L) x 0.75 inches (Dia.). Aluminum and plastic

1 x Tin wire tube: 60/40 0.031 0.50 oz.

1 x Soldering holder with cleaning sponge

1 x Carrying bag: PU leather

6pcs double-sided solder assist tool can satisfy 12 different usage: Around 6.6 inches in length.Treated steel (tips), and plastic (handle) including the following:

1 x Solder assist screwdriver: clear unnecessary circuits on PCB

1 x Solder assist fork: the components of pins and connecting line

1 x Solder assist squeeze head: compress small electronic components

1 x Solder assist hook: remove small resistor

1 x Solder assist brush: clean dust and residues in solder parts

1 x Solder assist needle: clean holes that choked with solder

60W Soldering Iron Gun ,Welding Soldering Iron

Specifications
Work voltage: 110V
Power: 60W
Temp range: 200~450℃
Tips model: 900M series
Case material: Plastic
Stand: Steel
Solder sucker: Plastic and aluminum alloy
Solder wire: 97%Sn-0.7%Cu-2.0%Flux-0.8mm dia.- 0.64 oz
Package included
1 x Tool carry case
1 x Adjustable temperature soldering iron (60W 110V)
1 x Solder wire
1 x Stand with Cleaning Sponge
1 x Solder sucker(Desoldering Pump)
5 x Extra soldering iron tips (Total 6 Pieces)
1x User Manual

  • 6-in-1 FULL KIT – Kit comes with tool carry case, soldering iron, 5 soldering tips, soldering sucker (desoldering pump), solder wires, stand with Cleaning Sponge. FULL SET tool make it perfect for daily use such us electric repair, home DIY and wood burning projection.
  • HEAT UP Quickly – 60 watts, with Upgraded ceramic heater chip and heat up quickly (2 minutes or so). Adjustable temperature with thermostat range 200~450℃.
  • Better Heat Dissipation hole and anti-slip handle – 3 heat dissipation holes on the tips and anti-skid rubber handle is good for long time project.
  • Safe and environmental protection soldering wire included, there are ingredient listed on the tinned tube package, lead free solder wire is Environmentally friendly , non-toxic, non-polluting, safe to use.
  • Easy for storage – Tool carry case is an additional feature, and rather convenient to store small tools and easy to carry.

Vastar 16-in-1 60W  Welding Soldering Iron 

The Vastar soldering iron that is made of iron plated tip and stainless steel, ensures the quality of the products and the properties of the stability and reliability. Adjustable temperature controlled soldering irons: 200-450 degrees centigrade, there is an special thermostat circuit to control the temperature and you can adjust the temperature according to your need by the knob wheel on the Electronic Soldering Iron . Beyond that, we specially provide you 5 soldering iron tips in order to meet different soldering jobs.You don’t need a soldering station, just plug and it will work.

Specification: 
Soldering Iron Length: 7.0 In
Cable Length: 59.0in
Working Voltage: 110V
Power: 60W

Package included:
1 x Temperature Adjust Soldering Iron
5 x Soldering Iron Tips
6 x soldering iron accessories
1 x soldering stand
1 x Pocket Pack Solder 60/40 0.031 0.71 oz. Tube
1 x Anti-static Tweezers
1 x Desoldering Pump
1 x Carry Case
1 x Manual

Warranty:
18-month warranty. Any questions you have, please don’t hesitate to contact us. We will get you back within 24hours.

(we have written a guide about Impact Wrench and chainsaw).